FLOW METERING AND SHUT OFF SLIDE GATES
WGBenjey slide gates are designed for use with our air slides or in other dry bulk handling and low-pressure applications. Gates can be fully configured for your existing equipment as well. We will design the pass-through size and the flange hole pattern to match the mating equipment. Our gates are typically rectangular but can be designed for round chute applications.
We offer gates with both manual hand wheel and powered actuation. The actuator for the powered gate can be pneumatic, hydraulic, or electric depending on your needs. For metered flow applications, you can order our gates with position sensors so the opening size can be set from a remote control room. All gates use abrasion-resistant plates for the gate itself, while the frame is typically carbon steel. Stainless steel can be used if requested. We use a traditional roller gate design, where the gate is supported by heavy-duty track rollers.
WG Benjey Inc.
318 Cavanaugh St.
Alpena, MI 49707 USA
(989) 356-1433 | (800) 269-9006
sales@benjey.com
Manual Slide Gates
Fabricated with the following features
- Designed to match customer-specified mating equipment
- Carbon steel frame with abrasion-resistant gate
- Hand wheel mounted to ACME screw for gate actuation
- Blade packing with UHMW rear wiper seal
- Gate supported by cam follower type rollers
- Ships with neoprene flange seals
- Primed and painted to customer specifications
*NOTE: Gate is not designed to cut a static column of material.
Powered Slide Gates
Fabricated with the following features
- Designed to match customer-specified mating equipment
- Carbon steel frame with abrasion-resistant gate
- Options of pneumatic/hydraulic cylinder or electric ball screw for gate actuation
- Blade packing with UHMW rear wiper seal
- Gate supported by cam follower type rollers
- Gate retract area covered by expanded metal guards
- Position sensors can be added if required
- Ships with neoprene flange seals
- Primed and painted to customer specifications
*NOTE: The gate is not designed to cut a static column of material.
